Contact Robey's Powerkleen at 859-484-7337
📦 Shipment Tracking
Enter your PRO number to track your shipment
Loading tracking information...
No tracking information found for this PRO number.
How to remove a machine from a pallet.
This video shows the easy, safe way to get your machine off the pallet without beating it up.
You’ll see two simple ways to do it:
• Use a piece of plywood as a ramp with a block or two underneath
• Or step it down with blocks if you don’t have plywood handy
The big thing is taking it slow so the wheels don’t drop hard. It also shows how to support the back so the squeegee doesn’t bang into the pallet and what to do if it gets hung up.
A few extra minutes here can save you a lot of headaches later.
How to safely lift the machine off the pallet using a forklift.
This video shows how to safely lift the machine off the pallet using a forklift when you don’t have a plywood ramp.
The key is doing it steady and square.
Pull in straight and keep the forks flat so you’re not stabbing or breaking anything underneath. The bottom of the deck is solid, so set one fork under one side and the other fork under another strong point so the weight sits in the frame — not in plastic or weak parts.
Give the forks a slight tilt so they’re level, lift the machine straight up, and back away from the pallet. For extra safety, you can also lift it just enough to slide the pallet out and set the machine straight down.
Once it’s on the ground, level the forks and back out clean.
The main thing: don’t drive around with it lifted any more than you have to. The less travel, the better.
Take it slow, keep it square, and you’ll get it off the pallet the right way.
695 N Main St., Winchester, KY 40391
